8.2
Replacing the HDD fan module
Upgrade and Repair Unit
(URU)
Tools: tool-less
8.2.1
Replacing the HDD fan module for 3.5-inch version
8.2.1.1
Preliminary steps
Before replacing the HDD fan module, perform the following steps:
Ê Locate the defective server as described in section
server" on page
Ê Shut down the defective server as described in section
server" on page
Ê Disconnect the AC power cord from the system.
Ê Remove the server cover as described in section
page
55.
Ê Open the front cage as described in section
page
60.
TX1320 M1
44.
52.
Upgrade and Maintenance Manual
System fan and HDD fan
Hardware: 5 minutes
"Locating the defective
"Shutting down the
"Opening the server" on
"Opening the front cage" on
159