Vibration & Shock; Controller - Epson StylusPro 10000 Service Manual

EPSON Stylus Pro 10000/10000CF
1.2.10.2 Vibration & Shock
See the following table.
Table 1-10. Vibration and Shock
Vibration
Condition
Resistance
0.15G
Operating
10~55Hz
0.5G
Storage
10~55Hz
Notes:
* Make sure the printhead is capped during transportation and storage. To cap the printhead,
turn the power on (with ink cartridges installed) and turn the power off when the printheads
are capped.
* To thaw frozen ink in the printer or cartridge, leave the printer out at a temperature of 25°C
(77°F) for approximately three hours.
Product Description
Shock
Notes
Resistance
1G
maximum 1ms
X/Y/Z directions
2G
maximum 2ms

1.2.11 Controller

CPU:
Code ROM:
Font ROM:
RAM:
Interfaces:
Operating System:
Specifications
Hitachi SH7709A, 120MHz
2MB
None
128MB (fixed)
IEEE1284 interface
USB1.1
Type B interface (2 expansion ports)
Hitachi HI7700 (µITRON 3.0 compatible)
Revision B
26