Adjustment Menu; Paper Skew - Epson StylusPro 10000 Service Manual

EPSON Stylus Pro 10000/10000CF

5.3.4.1 Adjustment menu

Following figure showing adjustment menu sequence.
Adj : Check Skew
Adj : Input Rank
Adj : Check Nozzle
Adj : Offset Adj
Adj : Det, Res.
Adj : A13 Slant
Adj : A123 Slant
Adj : B123 Slant
Adj : Bi-d
Adj : Head_LR
Adj : Feed Adj
Adj : Top & Bottom
Adj : Rear Sensor Pos.
Adj : Test Print
Adj : Clean Head
Adj : Counter Clear
Adjustment
Item
Enter

Paper skew

Pause
Item
Item
Item
Item
Item
Item
Item
Item
Item
Item
Item
Item
Item
Item
Item
Figure 5-39.
5.3.4.2 Paper Skew
Feed the paper and check the paper edge position with the P_Edge sensor, then compare the
difference between start position and stopped position.The result is displayed on the LCD
screen.
Finish the skew test by depressing "Pause" key at standby state.
Following figure showing skew menu sequence.
Check Skew 1.0m
Enter
Exc. Skew
Skew Result : xxxx mm
o
The skew value is determined at the first edge detection at left side of paper.
o
Pull the paper release lever toward up when the "Paper Out" LED indicator is light
or blinking.(Above LED indication means paper detection error.)
o
Panel key operation is as follows:
Enter: Go to the "Adj: Input Rank" menu.
Pause: Go to the "Adj: Check Skew"
All keys are inactive during the skew check operation.
Self-Diagnostics
Select the proper value
with [Paper Feed+/-] key.
Figure 5-40.
Revision B
228