Epson StylusPro 10000 Service Manual page 150

EPSON Stylus Pro 10000/10000CF
15. Remove four screws (M4x8) fixing each Suction Fan cover.
16. Turning over and extract the Suction Fan the cable connector of the reverse side,then
remove it from the clamp.
Cable Connector
Disassembly & assembly
Screw
Sction Fan Flame
Screw
Figure 4-79.
Cable Clump
Figure 4-80.
17. Remove three screws ( M4x8) , then remove the Suction Fan.
Sction Fan
Carry out the justification with the L style gauge, when assemble the
sub platen. (Refer to Chapter 5 "the adjustment")
Disassembly Flow
Screw
Figure 4-81.
Revision A
150