Removing Dot Missing Detector - Epson StylusPro 10000 Service Manual

EPSON Stylus Pro 10000/10000CF

4.2.3.13 Removing Dot Missing Detector

This unit contains laser generation elements. Be careful handling this
unit. Read precautions given in the preface.
The following label is attached on the unit.
Window
In the case that removed or exchanged the Dot missing detector, carry
out the dot missing offset adjustment.
1. Pull out three waste ink tubes from tube clump.
2. Remove the Flushing Box as described in "Removing Dot Missing Detector 171.
Disassembly & assembly
Figure 4-133.
3. Lift up the ink pump ASSY to release the carriage lock, and move the carriage away
from the home position.
4. Disconnect the connector connected to CN17, CN18 on the C362DRV board, then
remove it.
Dot missing
detector
Disassembly Flow
Figure 4-134.
Cables
(connected to
CN17, CN18 on the
C362DRV board)
Figure 4-135.
Revision A
171