Circuit Board Removal; Power Board Removal - Epson StylusPro 10000 Service Manual

EPSON Stylus Pro 10000/10000CF

4.2.2 Circuit Board Removal

This section explains how to remove the Power Board, the HJFK / Dummy Board, the
C362MAIN Board, the CSIC Board, the C362DRV Board and the P/S Fan.
Disassembly & assembly

4.2.2.1 Power Board Removal

Unplug the AC power cable and wait at least five minutes before
removing the power board to make sure there is no residual power
left in the board's condensers.
1. Remove the Rear Cover as described in "Rear Cover Removal" paragraph 4.2.1.7.
2. Remove the three cables connected to the Power Board as shown below.
Table 4-2. Power Board Connectors
Connector # Pins
CN2 3
CN3
CN4 12
CN2
CN4
Disassembly Flow
Color Connection
BIK/R/ORG C362DRV Board CN56
None
YEI/BRN/RED/
C362DRV Board CN40
BIU/ORG/BIK
Figure 4-41.
Revision A
Notes
133