Epson StylusPro 10000 Service Manual page 90

EPSON Stylus Pro 10000/10000CF
Table 3-1. Panel display
LCD message
NOZZLE CHECK
Nozzle check error
ERROR
CLOSE INK
Ink cover open
CART.COVER
Wrong ink cartridge (Dye /
WRONG CARTRIDGE
Pigment)
INVALID CARTRIDGE Illegal ink cartridge
COMMAND ERROR Wrong printer driver
INK LOW Ink low
READY Ready to print
NOT READY Not rady to print
PRINTING Processing data
TURN PWR OFF AND ON Restarting requied
SERVICE.REQ.nn Fatal error
Troubleshooting
Status Type Reference
Table 3-24,
"Nozzle check
Error
error," on
page 98
Table 3-25,
"Ink cover
open," on
Error/
page 98 /
Warning
Table 3-6, "Ink
Cover Open,"
on page 93
Table 3-26,
"Wrong ink
Error
cartridge," on
page 98
Table 3-27,
"Illegal ink
Error
cartridge," on
page 98
Table 3-28,
"Wrong IK
Error
designation," on
page 98
Table 3-4, "Ink
Warning Low," on
page 93
-
-
-
-
Table 3-29,
Error "Fatal Error,"
on page 99
Troubleshooting Using the Messages
LCD message
WAIT
POWER OFF
PAUSE
MAINTENANCE
REQ.nnnn
RESET
*1:The numbers of 4 columns that shows the kind of maintenance demand to,XXXX enter.
*2:Only when the panel display of the PG binding is PG setting = Large, the "h" is
displayed to the 20th columns of the liquid crystal devices.
*3:The processing progress status is displayed "%". (=100% the end)
*4:The display priority of case that the error occurred the plural is as it showed it in the
Table 3-2, "Printer Condition Display Priority," on page 90.
Table 3-2. Printer Condition Display Priority
Prioyity
High Fatal errors / Restarting required
Paper jam
During power OFF sequence
-
Reset, timer IC reset/NVRAM clear
During power OFF sequence
-
During ink cartridge replacement
-
Cover open
Paper set lever is released during operation
Paper set lever is released
Table 3-1. Panel display
Status
In ink sequence
In power off sequence
Pause
Maintenance call Warning
Reset
Status
Revision B
Type Reference
- -
- -
- -
Maintenance
call, page 101
- -
90