Epson StylusPro 10000 Service Manual page 157

EPSON Stylus Pro 10000/10000CF
17. Raising a few of the lower part of Head ASSY, then draws out it to the front lower
side.
Exchange the spring, in the case that the compression spring is caused
transformed.
Disassembly & assembly
Figure 4-99.
When disassemble / assemble the Head ASSY, pay attention in the
following point.
n
Do not touch and soil the surface of the head.
n
When assemble the head, the carriage is migrated to the left
side, while confirming the part that showed in the next figure
from the reverse side, fixed so as not to contact the surface of
the head in the head base.
n
When assemble the tube, confirm that the nut on the side of the
metal pipe is tightened firmly.
Disassembly Flow
Revision A
Head surface
Head base
157