Epson StylusPro 10000 Service Manual page 232

EPSON Stylus Pro 10000/10000CF
n
Move the cursor to the right with "SelecType" key.
n
Move the cursor to the left with "Item" key.
n
Cursor move to the left edge when you press the "SelecType" key at the right
edge.
n
Cursor move to the right edge when you press the "Item" key at the left edge.
n
Cursor skip the space area.
n
When the [Enter] key is pushed with [Head * -1]-[Head * -4], display moves to
the menu next to 1 hierarchy.
n
When the [Enter] key is pushed with [Head * -5], rank of the head is settled.
n
After the code of the Head 1 or the Head 2 is input, display moves to [Head 2 code
input] or [Head 3 code input] individually.
n
After the ink fill, display moves to the top menu of the adjustment.
n
When the [Pause] key is pushed, display moves to the menu next to 1 hierarchy.
At this time, pay attention the code that input is not settling, although it is
effective
Adjustment
DYESTUFF
Mode for the head selection of dyestuff ink code.
Following figure showing the sequence.
Input Head 1 Code
SelecType
Input Head 2 Code
SelecType
Input Head 3 Code
SelecType
Self-Diagnostics
Item
Press the [Enter] key to select
the input mode of Head 1.
Item
Press the [Enter] key to select
the input mode of Head 2.
Item
Press the [Enter] key to select
the input mode of Head 3.
Figure 5-47.
Revision B
232