Epson StylusPro 10000 Service Manual page 233

EPSON Stylus Pro 10000/10000CF
o
Input for the dyestuff
Mode for the head code input. Cursor is appeared under the input column.
Following figure showing the menu sequence.
Head 1- 1 1 2 \ 3 4 \ 5
Head 1- 1 1 2 \ 3 4 \ 5
Head 1- 1 1 2 \ 3 4 \ 5
Head 1- 1 1 2 \ 3 4 \ 5
Head 1- 1 1 2 \ 3 4 \ 5
Enter
Input end with "Pause" key.
Wait
Exc. Enter Fill
Enter
Please Set Ink
Enter
Ink Charge
Adjustment
Select the proper value with
"Paper Feed+/-" key.
Select the proper value with
"Paper Feed+/-" key.
Select the proper value with
"Paper Feed+/-" key.
Select the proper value with
"Paper Feed+/-" key.
Select the proper value with
"Paper Feed+/-" key.
Return to the top menu of adjustment
by pressing "Pause" key.
Return to the top menu of adjustment
by pressing "Pause" key.
Return to the top menu of adjustment
by pressing "Pause" key.
If the cartridge is not installed, left hand of
the message will appears.
Figure 5-48.
n
Move the cursor to the right with "SelecType" key.
n
Move the cursor to the left with "Item" key.
n
Cursor move to the left edge when you press the "SelecType" key at the right
edge.
n
Cursor move to the right edge when you press the "Item" key at the left edge.
n
Cursor skip the space area.
n
When the [Enter] key is pushed with [Head * -1]-[Head * -4], display moves to
the menu next to 1 hierarchy.
n
When the [Enter] key is pushed with [Head * -5], rank of the head is settled.
n
After the code of the Head 1 or the Head 2 is input, display moves to [Head 2 code
input] or [Head 3 code input] individually.
n
After the ink fill, display moves to the top menu of the adjustment.
n
When the [Pause] key is pushed, display moves to the menu next to 1 hierarchy.
At this time, pay attention the code that input is not settling, although it is
effective
n
The migration of the cursor is skipped in the display item of [ \ ].
Self-Diagnostics
Revision B
233