Epson StylusPro 10000 Service Manual page 149

EPSON Stylus Pro 10000/10000CF
11. Open as inside of the fan duct becomes upward like the rough sketch, after it raises it a
little upward, while paying attention so as not to scar each cable of the right and left.
Cable left side
Disassembly & assembly
Cable right side
Figure 4-76.
12. Disconnect left side suction location detect sensor cable connector.
Suction location
detect sensor cable
13. Remove one screw (M4x8) fixing right P_FRONT sensor, and remove P_FRONT
sensor with bracket.
P_FRONT sensor
14. Remove the Fan Duct.
Disassembly Flow
Figure 4-77.
Figure 4-78.
Revision A
Screw
149