EPSON Stylus Pro 10000/10000CF
3.
Disconnect the P/S self-containing fan connector connected to CN39 on the C362DRV
board.
Disconnect cable connector
4.
Remove the four white screws (CPS:M3x8) securing the Power Board, and then
remove the Power Board.
Screw
Screw
Disassembly & assembly
P/S Self-containing
Figure 4-42.
Figure 4-43.
4.2.2.2 HJFK / Dummy Board Removal
(Any of the HJFK board or the Dummy board of the option are fixed.)
1.
Remove the rear cover as described in "Rear Cover Removal" (Paragraph 4.2.1.7.)
2.
Pull off the "Option block" to the upward.
Fan
HJFK / Dummy
board
Screw
Screw
Disassembly Flow
Option block
Figure 4-44.
Revision A
134