Epson StylusPro 10000 Service Manual page 115

EPSON Stylus Pro 10000/10000CF
n
If ink gets on your hands, wash them thoroughly with soap and
water. If ink gets in your eyes, rinse them immediately with
water.
n
If it is necessary to remove external printer parts while the
printer is turned on, be very careful around movable or spinning
parts such as the carriage and fans.
n
Keep in mind that the carriage drive belt and cutter blade can be
dangerous.
n
Always ware gloves for disassembly and assembly to avoid injury
from sharp metal edge.
Danger of explosion if the battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by
the manufacture. Dispose the used batteries according to
government's law and regulations.
Disassembly & assembly
Do not remove and loosen the screw of the part that showed it below.
There is the danger that is impossible adjustment in the field and
cause a new obstacle and also become a reconditioning impossibility.
Summary
Revision A
115