Epson StylusPro 10000 Service Manual page 43

EPSON Stylus Pro 10000/10000CF
o
Exiting SelecType mode
Select one of the following methods to exit SelecType mode:
n
Press the Pause button while in SelecType mode; the printer is ready to print.
n
Perform the printer initialization.
n
Print a status sheet.
n
Print a nozzle check pattern.
n
Replace the cutter.
n
Press the SelecType button several times at the top level of SelecType menus.
n
Press the SelecType button one time at the second level of SelecType menus.
Product Description SelecType Settings
Revision B
43