Epson StylusPro 10000 Service Manual page 176

EPSON Stylus Pro 10000/10000CF
6. Remove right side two screw (M4x6) and front upper side two screw ( M4x6), then
remove the Paper Hold Solenoid with bracket.
Solenoid
Screw
Figure 4-147.
7. Remove one screw (M3x6) securing solenoid armature.
8. Remove two screws (M3x6) securing solenoid coil, then remove the Paper Hold
solenoid.
Figure 4-148.
Disassembly & assembly
Screw
Screw
Screw for armature
Disassembly Flow
When installing the Paper Hold Solenoid, make sure the lock lever
move smoothly. Otherwise loosen the armature screw and secure it
again.
Look lever
Figure 4-149.
Revision A
176