C362Main Board Removal - Epson StylusPro 10000 Service Manual

EPSON Stylus Pro 10000/10000CF
3. Remove one screw (CS:M3 x 6 ) then remove the board ASSY.
Disassembly & assembly
Screw
Figure 4-45.

4.2.2.3 C362MAIN Board Removal

1. Remove the HJFK / Dummy Board on the I/F bracket.
2. Remove eight screws on the I/F bracket, then remove the I/F bracket and two earth
plate.
Screw
Screw
3. Remove six screws on the "Interface Board".
Disassembly Flow
Earth plate
Figure 4-46.
Screw
Screw
Figure 4-47.
Revision A
135