Encoder - Epson StylusPro 10000 Service Manual

EPSON Stylus Pro 10000/10000CF
o
"INK NOT xxxxxx" : Display of "xxxxxx" means ink cartridge name with
symbolic code.
o
"EdgeAD xxxyyy"/"FrontAD xxxyyy/"RearAD xxxyyy" :
: Display of "xxx" means difference from ON minus Off, "yyy" means ON level.
Following figure showing the relation of sensor display and sub tank ink amount.
o
"F" will display when the overflow condition is presented.
o
"Laser xxxx" :Display of "xxx" means AGC thresh hold value. If the value is less than
"2208" you need to replace the dot missing detector unit.
Adjustment
Figure 5-22.

5.3.3.5 Encoder

Display the CR and PF encoder value.
Following figure showing the encoder test sequence.
Display unit is the number of encoded pulse.
Self-Diagnostics
Item
Encoder : CR xxxx
0000
Select Type
Item
Encoder : PF xxxx
FFFF
Select Type
Figure 5-23.
Revision B
218