Version Display - Epson StylusPro 10000 Service Manual

EPSON Stylus Pro 10000/10000CF

5.3.3.2 Version display

Display the firmware version.(I/F controller, Engine controller)
Ensure the ESC/P3 controller, Backup parameter and Dip SW(on:0,off:1).
Individually display the version on the panel.
Following table showing version display sequence.
Ver : I/F
Ver : Engine
Ver : ESC/P3
Ver : Param 1
Ver : Param 2
Ver : Dip SW
Ver : Main Rev
Ver : Panel Rev
Figure 5-19. Version display sequence
Adjustment
Item
Select Type
Item
Select Type
Item
Select Type
Item
Item
Select Type
Select Type Item
Select Type Item
Select Type
Item
Select Type
Additional information for version display.
Display the version as follows;
ddym
NOTE: dd: Date
NOTE: y: Year
NOTE: m: Month
<Example display meaning >
" 0507" means: Year=2000/Month=7/Date=5
If the I/F or ESC/P3 is not installed, each version display becomes "N/A".
Self-Diagnostics
Revision B
216