P/S Fan Removal - Epson StylusPro 10000 Service Manual

EPSON Stylus Pro 10000/10000CF

4.2.2.6 P/S Fan Removal

1. Remove the Rear Cover as described in paragraph 4.2.1.7.
2. Remove the connector from CN1 on the C362MAIN board, and unlock from the cable
clump.
Cable Clump
3. Remove one screw fixing the earth plate connected to CN42 on the C362MAIN board,
and disconnect fan cable connector.
Auto take-up roller connector
Disassembly & assembly
Cable Connector
Figure 4-57.
Connector
Screw
Figure 4-58.
4. Remove one screw securing the P/S Fan holder, then remove it.
Screw
5. Remove two screws securing the P/S Fan on the P/S Fan Holder, and remove it.
Fan screw
Disassembly Flow
P/S Fan Holder
Figure 4-59.
P/S Fan Holder
Figure 4-60.
Revision A
141