Life Confirmation - Epson StylusPro 10000 Service Manual

EPSON Stylus Pro 10000/10000CF
o
In the case that the parameter of CW is [off], the CCW parameter input screen is
skipped.
o
The maximum value of the paper feed is [100.0mm].
o
The maximum value of the CR + PF reliability number is [999 times].
o
The maximum value of the reliability number designation is [21,600 times].
o
Carriage migration MAX location is 738.06 mm from the starting point location.
o
Carriage migration MIN location is 111.05 mm from the starting point location.
o
When the [Pause] key is pushed during the reliability test, the test can be broken.
o
Following table showing the default value of total reliability test.
Item
CW speed 240 CPS
CCW speed 240 CPS
Feed amount 3.0mm
CR + PF count 500
Life count -1
Adjustment
Table 5-23.
Default value

5.3.8.12 Life confirmation

Confirm the number of endurance.
You can confirm the endurance record any time because this record is storage in NVRAM.
Following figure showing the reliability number confirmation test menu sequence.
Self-Diagnostics
Item
SelecType
CR Motor : 50
SelecType Item
PF Motor : 3
SelecType Item
CR+PF Motor : 100
SelecType Item
Cutter
SelecType
Item
Head U/D : 55
SelecType Item
HeadLock : 77
SelecType Item
Lever Lock : 25
SelecType Item
Cleaning : 8
SelecType Item
Print Number : 9
SelecType Item
Shutter
SelecType Item
TotalLife : 30
Figure 5-109.
Revision B
275