Epson StylusPro 10000 Service Manual page 162

EPSON Stylus Pro 10000/10000CF
Some of ink will remain in the tube. Proceeding to the nut removal,
put the waste paper or similar to the nut for leakage ink
absorption.
8. Remove two screws ( M3x8) securing ink cartridge holder.
Figure 4-110.
9. Remove the ink cartridge holder to the rear side.
Disassembly & assembly
Screw
Screw
Some of ink will remain in the tube, proceeding to the nut removal,
put the waste paper or similar to the nut for leakage ink
absorption.
Do not lose the O-ring between the tube and nut.
Disassembly Flow
Revision A
O-ring
Figure 4-111.
162