Epson StylusPro 10000 Service Manual page 106

EPSON Stylus Pro 10000/10000CF
SERVICE REQ. 0001000D: COVER SENSOR MULFANCTION
SERVICE REQ. 0001000E: COVER SENSOR MULFANCTION
o
Solution
The sensor attachment location of the 2 pieces of right and left are confirmed. In
the case that the error is not canceled in spite of proper location the cover opening
detection sensor is checked.
In the case that there is abnormality:
n
It confirms whether n cover sensor cable is jointed to the C362DRV board (CN4/
5).
n
Cover sensor exchange
n
C362DRV board exchange
SERVICE REQ. 0001000F: CR MOTOR OVER HEAT (PWM OUTPUT
MALFUNCTION)
o
Problem
PWM signal adds CR motor for a static time. This means the motor is having any
load continuously.
o
Solution
n
Confirmation of the dirt/paper powder/damage of the confirmation T fence (scale
180a) the top
n
CR encoder exchange
n
CR motor exchange
n
C362DRV board exchange
SERVICE REQ. 00010010: PF MOTOR OVER HEAT (PWM OUTPUT
MALFUNCTION)
o
Problem
PWM signal adds PF motor for a static time. This means the motor is having any
load continuously.
o
Solution
n
PF timing belt tension confirmation/adjustment
n
PF roller and PF roller subordinate movement.
Troubleshooting
n
PF timing belt replacement
n
PF motor replacement
n
C362DRV board replacement
SERVICE REQ. 00010011: PAPER JAM
Not supported.
SERVICE REQ. 00010012: CAP ORIGIN (HOME POSITION) ERROR
o
Problem
n
Starting point detection error or cap starting point sensor defective treatment by
cap motor step-out.
n
Cap home position sensor is in trouble.
n
Cap motor is in trouble, motor connector is disconnected or cable is disconnected.
S
o
Solution
n
Cable splicing confirmation between the cap starting point sensor and CSCI board
n
Sensor exchange
n
Cap/pump unit exchange
SERVICE REQ. 00010013: PROVIDING SYSTEM ORIGIN ERROR
o
Problem
n
It is defective the starting point detection error or providing system starting point
sensor
n
Providing home position sensor is in trouble.
n
Providing motor , motor connector or cable is in trouble.
o
Solution
n
Supply system motor exchange
n
Supply system starting point sensor exchange
n
C362DRV board exchange
Service engineer require message
by the motor step-out of ink pump Assy.
Revision B
106