Print Head Cleaning - Epson StylusPro 10000 Service Manual

EPSON Stylus Pro 10000/10000CF

5.3.4.16 Print head cleaning

This is the item that is carried out at the time of the end of the production process or before
the head exchange.
Following figure showing the head washing menu sequence.
Set Discharge I/C
Ink Blowing
Set Wash I/C
Head washing
Set Discharge I/C
Washing liquid Blowing
Adj : Counter Clear
Adjustment
Skip the Ink Blowing
Enter
Skip the Head Washing
Enter
End with "Enter" key.
Enter
Figure 5-77.
n
Do not carry out the counter clear of the menu that is displayed
at the end of the head washing.
n
If the "Adjustment counter clear" was displayed, turn off the
power supply of the printer and get out of from the self
diagnostic operation mode.
Reason: Even the binding of the dye/paint is cleared by the
counter clear. After then, the printer becomes dye/paint selecting
condition, in the case that there is not the ink cartridge for
starter and you can not go ahead previously.
Self-Diagnostics
Revision B
250