Self-Diagnostics - Epson StylusPro 10000 Service Manual

EPSON Stylus Pro 10000/10000CF

5.3 Self-Diagnostics

Self diagnostics has function of mechanism adjustment and also firmware adjustment
parameter. The function is incorporated to the firmware and available them with specific
button pushing at the power on.
During the normal operation mode, it is impossible to change the mode to self-
diagnostic.The self-diagnostic function menu is shown on the Table 5-9, "Self-Diagnostic
Mode Controls," on page 208 and Table 5-10, "Self-Diagnostic Menu Stratum," on
page 208. a
Table 5-9. Self-Diagnostic Mode Controls
Item
Version,Panel,Sensor,Encorder,Fan,History,D/A correction, CSIC,
Check
Actuator
Head department adjustment, Sensor position adjustment, Paper feed
Adjustment
correction
Cleaning Four mode of cleaning
Print Check pattern, adjustment variables
Parameter Initialize/Update/Display the NVRAM,
CR Motor, PF Motor, Cutter, Head up and down, Carriage lock Lever
Life
lock, Cleaning, Print, Shutter, etc.,
Adjustment
Description
Self-Diagnostics
Table 5-10. Self-Diagnostic Menu Stratum
Hierarchy1 Hierarchy2 Hierarchy3
I/F
Engine
I/F
Engine
ESCP/3
Version
Parameter 1
Parameter 2
Dips
Main Rev.
Panel Rev.
key
Panel LCD
Check LCD
CR home
Cap home
Power supply -
Cover
Lever
Sensor
Shutter home -
Paper thick
Head slide
Ink Not
Ink cover
Edge AD
Revision B
Hierarchy4 Hierarchy5
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
-
- -
- -
-
- -
- -
- -
- -
- -
208