Gap Adjustment - Epson StylusPro 10000 Service Manual

EPSON Stylus Pro 10000/10000CF

1.6.6 Gap Adjustment

Selecting this mode allows the user to adjust the following.
Paper thickness (in 0.1mm units)
Bi-d adjustment 1 (240cps, VSD1, Small)
Bi-d adjustment 2 (300cps, VSD2, Large)
<Setup>
1. Set the paper in place.
2. Select the gap adjustment menu from the panel.
3. Set to 'STD' when using EPSON paper (0.2mm or 1.2mm thick). For other paper, set
thickness in units of 0.1mm.
4. Select the adjustment pattern to be printed (all or individual), and print.
5. Check the printed adjustment patterns and enter the number of the pattern with the least
displacement for each adjustment item.
6. Repeat (4)~(5) until adjustment of all items is complete.
Product Description
Table 1-34.
Items
Figure 1-11. Gap Ajustment print pattern
Figure 1-12. Gap Ajustment print pattern
SelecType Settings
Revision B
49