Head Rank Input - Epson StylusPro 10000 Service Manual

EPSON Stylus Pro 10000/10000CF

5.3.4.3 Head Rank input

Head rank is the characteristic of the head and each head has own value (QR code). This
value is used for determination of head drive voltage and temperature correction in order to
obtain a fine print quality.
Following figure showing input menu.
Item
Rank Input : QR code
SelecType
Rank Input : Panel
SelecType
QR CODE INPUT
Mode for the QR code input.
n
This head rank input way is for production line by a special bar
code reader.
n
For service, you should perform head rank input by panel input.
Adjustment
Press the [Enter] key to QR
code receive mode on line.
Item
Press the [Enter] key to code
input mode with the panel.
Figure 5-41.
Following figure showing QR code input menu.
Wait
Finish the head movement
Input QR Code
Input value is valid
End with "Pause" key
Pause
Wait
Finish the head movement
Exc. Enter Fill
Enter
Please Set Ink
Enter
Ink Charge
o
"Pause" key initiate the "Input QR Code" menu.
o
Input is ended when 3 head are input.
o
After the ink charge, it goes top menu of adjustment.
o
If the error condition is presented, retry it again from head 1 input.
Self-Diagnostics
Error! Rank Input
Enter
Press the [Enter] key to [Rank input]
display, but pay attention because rank
is renewed.
Display when the cartridge is not set.
Figure 5-42.
Revision B
229