Table of Contents
Advertisement
User's Guide
Pages are Blank or only a Small Amount of Text is Printed on the
Second Page in Received Faxes
You can print on one page by using the Delete Print Data After Split feature in Split Page Settings.
Select Delete Top or Delete Bottom in Delete Print Data After Split, and then adjust Threshold. Increasing the
threshold increases the amount deleted; a higher threshold gives you a higher possibility of printing on one page.
Related Information
"Print Settings" on page 143
&
Other Faxing Problems
Cannot Make Calls on the Connected Telephone
Connect the telephone to the EXT. port on the printer, and pick up the receiver. If you cannot hear a dial tone
through the receiver, connect the phone cable correctly.
Related Information
"Connecting Your Phone Device to the Printer" on page 117
&
Answering Machine Cannot Answer Voice Calls
On the control panel, set the printer's Rings to Answer setting to a number higher than the number of rings for
your answering machine.
Related Information
"Basic Settings" on page 145
&
"Settings for the Answering Machine" on page 128
&
Sender's Fax Number Not Displayed on Received Faxes or the
Number Is Wrong
The sender may not have set the fax header information or may have set it incorrectly. Contact the sender.
Other Problems
Slight Electric Shock when Touching the Printer
If many peripherals are connected to the computer, you may feel a slight electric shock when touching the printer.
Install a ground wire to the computer that is connected to the printer.
Solving Problems
211
Advertisement
Table of Contents
