Cutter - Epson StylusPro 10000 Service Manual

EPSON Stylus Pro 10000/10000CF

5.3.8.4 Cutter

Perform the cutter reliability test.
Perform the cut designated number at designated parameter.
When the reliability number is [-1], reliability is repeated until key is input.
When the reliability number is [-1], the biggest count number is 99,999,999 times (within 8
column), and the count become 0 in the case that this is exceeded.
Adjustment
Following figure showing the cutter reliability test menu sequence.
Soft Landing 1 : 80%
Enter
Soft Landing 2 : 60%
Enter
Soft Landing 3 : 40%
Enter
Soft Landing 4 : 60%
Enter
Soft Landing 5 : 40%
Enter
Paper Pre. 100%
Enter
Pressure 60%
Enter
1
Self-Diagnostics
Revision B
Adjustable with "Paper Feed +/-" key
at unit of 1%
Adjustable with "Paper Feed +/-" key
at unit of 1%
Adjustable with "Paper Feed +/-" key
at unit of 1%
Adjustable with "Paper Feed +/-" key
at unit of 1%
Adjustable with "Paper Feed +/-" key
at unit of 1%
Adjustable with "Paper Feed +/-" key
at unit of 1%
Adjustable with "Paper Feed +/-" key
at unit of 1%
269