Mechanical Adjustment; Adjusting The Paper Reference Position - Konica Minolta Bizhub C350 Service Manual

Mechanical adjustment

3. Mechanical adjustment
3.1

Adjusting the paper reference position

NOTE
• Make this adjustment after any of the following procedures has been performed.
When the PH Unit has been replaced.
When the image on the print is offset in the FD direction.
When a faint image occurs on the leading edge of the image.
bizhub C350 Field Service Ver.1.0 Mar. 2004
1. Display Tech. Rep. Mode.
☞ For details of how to display the
Tech. Rep. Mode screen, see the
Adjustment/Setting of the main unit
service manual.
2. Touch "Machine Adjust".
4348fs3505e0
3. Touch "PRT Area".
4348fs3506e0
4. Touch "Left Margin".
4348fs3507e0
5. Touch "3rd" and then press the
"Start" key.
6. A test print will be produced.
4348fs3508e0
3-4