3.13 Call Service Cent; 3.14 Settings In Printer Setting; Common Setting - Konica Minolta Bizhub C350 Service Manual

bizhub C350 Field Service Ver. 2.0 April 2004

3.13 Call Service Cent.

Functions • To transmit various types of data representing the machine conditions to the
Center when the Remote Diagnosis System is mounted.
Use • To transmit machine data to the Center
Setting/Procedure • Press the Call Service Cent. key to execute the user transmission.

3.14 Settings in Printer Setting

3.14.1

Common Setting

A. PDL Setting
Functions • To set the default page description language (PDL) for the printer controller
✽ Only the PDLs mounted in the machine can be selected.
Use • To change the PDL
Setting/Procedure • Options displayed represent the PDLs mounted in the machine.
Typical options: Auto Set
B. I/O Timeout
Functions • To set the I/O timeout period for communications
Use • To extend the timeout period if timeout occurs frequently depending on the net-
work conditions
Setting/Procedure • Use the 10-Key Pad to enter the Auto Panel Reset time. (10 to 300 sec.)
• The default setting is 15 sec.
C. Parallel Interface
Functions • To set the two-way communication system for the parallel interface
Use • To change the communications method of the parallel interface
Setting/Procedure • The default setting is ECP.
D. Screen Pattern Setting
Functions • To set the screen pattern for PC print
Use • To change the screen pattern to be output in PC print
Setting/Procedure • The default setting is Gradation.
PCL PostScript
15 sec (10 to 300)
Compatible Nibble
Gradation Resolution
3-21
GDI
ECP
Utility Mode