Punch Unit - Konica Minolta Bizhub C350 Service Manual

bizhub C350 Field Service Ver.1.0 Mar. 2004
[3]
[4]
1.3.21

Punch Unit

[2]
[4]
[5]
[8]
[9]
4583fs2582c0
[8]
[7]
[6]
[5]
4583fs2583c0
[1]
4583fs2586c0
[3]
4583fs2587c0
[6]
[7]
[10]
4583fs2588c0
2-19
3. Remove the C-clip[3], and remove
the bushing [4].
4. Shift the Shaft Assy in the orientation
as shown on the left.
5. Remove the C-clip [5], the Gear [6],
the bushing [7], and remove the Mid-
dle Transport Roller [8].
1. Remove the Punch Trash Box.
2. Unplug the connector J1005 [1].
3. Remove the Harness from the Har-
ness Guide [2].
4. Unplug the connector [3].
5. Remove the screw [4], and remove
the Sensor Support Plate [5].
6. Remove the screw [6] and the
washer [7].
7. Unplug the connector [8].
8. Remove two screws [9], and remove
the base cover [10].
Other