Replacement Of The Manual Bypass Separator Roll Assy - Konica Minolta Bizhub C350 Service Manual

bizhub C350 Field Service Ver.2.0 April 2004
4.3.27

Replacement of the Manual Bypass Separator Roll Assy.

1. Remove the Rear Right Cover.
2. Remove the Lower Right Rear Cover.
3. Remove the Front Manual Bypass Cover.
4. Remove the REar Manual Bypass Cover.
4. Remove five screws and the Manual
4030D036AA
5. Remove one C clip and the Manual
6. Snap off one C-clip of the Paper
4030D037AA
7. Remove one C clip and the Manual
8. To reinstall, reverse the order of
9. Select "Tech. Rep. Mode"
4030D038AA
5. Remove the five screws and unplug
NOTE
• When the Manual Bypass Unit has
4030D032AA
2-61
Bypass Unit Lower Frame.
Bypass Paper Take-Up Clutch.
Take-Up Roll and one bushing.
Bypass Paper Take-Up Roller.
removal.
→ →
"Counter" "Life"
clear the counter.
three connectors. Then, remove the
Manual Bypass Unit.
been mounted, be sure to perform
the Manual Bypass Unit Installation
Check procedures.
Other
→
"Bypass" and