Adf Paper Passage - Konica Minolta Bizhub C350 Service Manual

bizhub C350 Field Service Ver.1.0 Mar. 2004
2.3

ADF Paper Passage

• The Paper Passage motion of the Automatic Document Feeder is checked.
<Procedure>
1. Set the mode to the Tech. Rep. Mode.
2. Touch the "ADF Check" key.
3. Touch the "Paper Passage" key.
4. Select the Paper Passage Mode to be tested from "1-Sided (No Detect)", "1-Sided
(Mixed Orig)" and "2-Sided".
5. Set the Original in the Take-up Tray.
The Start key color changes from orange to green.
6. Press the "Start" key. The operation starts.
NOTES
• After starting the operation by pressing the Start key, if the Start key is pressed
during the operation, the operation will be suspended. Then, if the Start key is
pressed again during the suspension, the operation will be resumed.
• If the Stop key is pressed during the test operation, the test will be forced to end.
• If there is no Original set in the Take-up Tray, the Start key will not work.
• All Originals set in the Take-up Tray are passed through. Upon the completion of
all Originals passed through, the Paper Through Test ends.
3-3
Tech. Rep. / Test Mode
4582fs3528e0