3.11 Settings In The Admin. Mode; Admin. Set - Konica Minolta Bizhub C350 Service Manual

Utility Mode

3.11 Settings in the Admin. Mode

• Entering the 8-digit administrator number set in the Admin. Mode will allow you to enter the Admin.
Mode (default value: 00000000).
3.11.1

Admin. Set.

A. 1/4
(1) Top Erase
Functions • To set the leading edge erase amount of the paper.
Use • To change the width of the area not printed along the leading edge of the paper
Setting/Procedure • The default setting is 5 mm.
(2) Disable Sleep Mode
Functions • To display the option of "No" for the Sleep setting screen available from User's
Choice 1.
Use • To display the option of "No" for the Sleep setting
Setting/Procedure • The default setting is No.
(3) A3 Wide Paper Size (Over Size Paper selection)
Functions • Select paper size of A3 Wide. (Over Size Paper)
Use • To change the full bleed paper size
Setting/Procedure • The default setting is 305 × 457 mm or 12 × 18.
Metric areas: 311 × 457 mm 305 × 457 mm
Inch areas : 12-1/4 × 18 12 × 18
(4) Locked Jobs Auto Delete Time
Functions • To set the period of time, at the end of which locked jobs are automatically
deleted
Locked job: Job to be printed only when a valid password is entered
Use • To change the period of time, at the end of which locked jobs are automatically
deleted
Setting/Procedure • Use the 10-Key Pad to enter the time.
• The default setting is No.
(5) Skip Volume Track (E. K. C.) Error
Functions • This function is used to specify whether or not other jobs can skip a job that was
stopped because the maximum number of copies has been reached for the
account.
Use • Used to specify whether or not other jobs can skip a job that was stopped
Setting/Procedure • The default setting is No.
bizhub C350 Field Service Ver 2.0 April 2004
5 mm 7 mm
Yes No
No (1 to 99 hour)
Yes No
3-16