Action When Data Transfer Fails - Konica Minolta Bizhub C350 Service Manual

Firmware rewriting
2.2.2

Action When Data Transfer Fails

• If "NG" appears on the Touch Panel, indicating that rewriting has been unsuccessful (in
which case the Start key lights up red), take the following steps.
1. Perform the data rewriting procedure again.
2. If the procedure is abnormally terminated, change the memory card for a new one and
try another rewriting sequence.
3. If the procedure is still abnormally terminated, change the board that has caused "NG"
and carry out data rewriting procedure.
APP MFP Control Board (PWB-MFP)
Font MFP Control Board (PWB-MFP)
bizhub C350 Field Service Ver.1.0 Mar. 2004
2-6