Konica Minolta Bizhub C350 Service Manual page 147

bizhub C350 Field Service Ver. 2.0 April 2004
D. Intelligent Sorting
Functions • To select whether to enable or disable the function that automatically switches
between Sort and Non-Sort according to the number of originals and the number
of copy sets to be made.
Use • To select not to use the automatic sorting function when a document of two or
more pages is loaded in the ADF
Setting/Procedure The default setting is Yes.
E. Criss Cross
Functions • To select whether to enable or disable the crisscross sorting function that stacks
sorted copy sets in a crisscross manner, i.e., one set stacked lengthwise on top
of another set stacked crosswise.
✽ Crisscross sorting is disabled when a Finisher is mounted on the machine.
Use • To disable crisscross sorting for paper of the same size
Setting/Procedure The default setting is Yes.
3.7.2 2/3
A. Paper Type Select
Functions • To set the paper type for Tray2 through Tray4.
Special paper: Type of paper that the user does not want to be automatically
selected (paper with company logo)
Use • To prevent a special type of paper, including that for use for single-sided only,
from being inadvertently used when such a type of paper is loaded in the trays
Setting/Procedure • The default setting is Standard (plain paper).
Standard, High Quality Paper, Single Sided Only, Specialty
B. Auto-select paper for small originals
Functions • To select whether or not to enable copying when an original, whose size falls
outside the detectable range, is loaded in the Auto Paper mode and to select the
paper source to be used.
Use • To use a document that is not good for original size detection (e.g. business
cards)
• If "ON" is selected, a copy cycle can be initiated even with no originals loaded.
Setting/Procedure • The default setting is OFF (disable copying).
• The default setting for the paper source is Tray1.
Yes No
Yes No
OFF ON
3-11
Utility Mode