Konica Minolta Bizhub C350 Service Manual page 506

Mechanical adjustment
4535fs3510e0
A
4535fs3506c0
3-4
bizhub C350 Field Service Ver.1.0 Mar. 2004
5. Touch "1st" and then press the
"Start" key. A test print will then be
produced.
6. Measure the width of printed refer-
ence line A.
Specifications: 3.0 mm
7. If the measured width A falls outside
the specified range, enter the correc-
tion value.
8. Produce another test print and check
for width A.
±
1.0 mm