Lph Unit - Konica Minolta Bizhub C350 Service Manual

Other
4.3.29

LPH Unit

1. Open the Front Door.
2. Slide out the IU (C, M, Y, Bk).
NOTE
• After the IU has been pulled out, place the IU lock lever back into the locked posi-
tion. When installing the Imaging Unit into the main unit, make sure that the Toner
supply shutter is opened if the Imaging Unit Lower Cover is not used.
3. Remove the Image Transfer Belt Unit.
☞ 2-24
4. Remove the Rear Right Cover, Rear Left Cover, Rear Cover and Upper Rear Cover.
☞ 2-40
[1]
[2]
[1]
[1]
[4]
[3]
[5]
bizhub C350 Field Service Ver. 2.0 April 2004
5. Remove 12 Screws [1], and remove
the Protective Shield [2].
[1]
4036fs2061c2
6. Remove four Screws [3], and remove
the Harness Protective Cover [4].
[3]
4036fs2096c0
7. Remove four Connectors [5] on the
Control Board.
4036fs2087c1
2-64