Cleaning Of Transport Roller; Cleaning Of 2Nd Image Transfer Entrance Upper Guide; Cleaning Of Scanner Rail - Konica Minolta Bizhub C350 Service Manual

bizhub C350 Field Service Ver.2.0 April 2004
1.5.9

Cleaning of Transport Roller

1.5.10

Cleaning of 2nd Image Transfer Entrance Upper Guide

1.5.11

Cleaning of Scanner Rail

[2]
[1]
[3]
[4]
[5]
1. Open the Right Door.
[1]
2. Using a soft cloth dampened with
4036fs2519c0
1. Open the Right Door.
[1]
2. Open the Left Door.
3. Remove the Waste Toner Bottle.
☞ 2-31
4. Remove two screws and slide the
☞ 2-24
5. Wipe the 2nd Image Transfer
4036fs2518c0
NOTE
• When cleaning, use care not to be
1. Remove three screws [1] and the IR
4036fs2504c0
2. Remove two screws [3] and two
3. Remove the Original Glass [5].
4036fs2505c0
2-17
Periodical check
alcohol, wipe the Transport Roller [1]
clean of dirt.
Transfer Belt Unit out halfway.
Entrance Upper Guide [1] clean of
dirt using a soft cloth.
hurt by the leading edge of the
guide that is sharp.
Upper Right Cover [2].
Original Glass fixing brackets [4] (at
the front and rear).