Coverage Rate Reset; Remote Diagnosis System Choice; Lock Job Authentication Mode; Iu Life Stop Setting - Konica Minolta Bizhub C350 Service Manual

bizhub C350 Field Service Ver. 2.0 April 2004
5.3.3

Coverage Rate Reset

Functions • To clear the coverage rate
Use • Use to clear the coverage rate
Setting/ • The default setting is No.
Procedure
• Pressing the END key will clear the coverage rate.
5.3.4

Remote Diagnosis System Choice

Functions • To select the Remote Diagnosis System
Use • Use to switch to the RD mode.
• The default setting is KRDS.
Setting/
Procedure
5.3.5

Lock Job Authentication Mode

Functions • To select the authentication mode for lock jobs
Mode 1: Unlock only the document selected
Mode 2: Unlock all documents, for which there is coincidence in the password.
Use • Use to change the mode to Mode 2.
Setting/ The default setting is Mode 1.
Procedure
5.3.6

IU Life Stop Setting

Functions • To select whether or not to stop a print cycle when the IU reaches its service life
Use • Use to select not to stop the print cycle when the IU reaches its service life.
Setting/ The default setting is Stop.
Procedure
5.3.7

Service Code Change

Functions • To change the service code used to enter the Tech. Rep. mode.
Use • Use to change the service code.
Setting/ • Enter the new service code from the 10-Key Pad. 8 digits (0 to 9)
Procedure
Current Service Code : Enter the service code currently used.
New Service Code
Retype New Code
NOTES
• The new service code is validated when you quit the Tech. Rep. mode after the
service code change procedure.
• NEVER forget the service code. Forgetting the service code means the replace-
ment of the Control Board (PWB-MC).
Yes No
KRDS RD Mode
Mode 1 Mode 2
Stop Not Stop
: Enter the service code to be newly used.
: Enter the new service code a second time.
3-99
Security