Tech. Rep. / Test Mode
2.
Tech. Rep. / Test Mode
• The Tech. Rep. / Test Modes are set from the Tech. Rep. Mode screen of the main unit.
2.1
Tech. Rep. Mode setting procedure
1. Press the "Utility" key.
2. Touch the "Counter List" Check key.
3. Press the keys, "STOP" --> "0" --> "0" --> "STOP" --> "0" --> "1", in this order.
4. Enter the service code (8 digits).
5. Select "ADF Check".
NOTE
• Do not teach this procedure to others unless it is absolutely necessary.
2.2
Type of the Tech. Rep. Mode
• The ADF Check in the Tech. Rep. Mode has 7 items as follows.
• Original Stop Position (Adjust)
• Auto Adjust Stop Position (Adjust)
• I/O Check (Test)
• Sensor Auto Adjust (Adjust)
bizhub C350 Field Service Ver.1.0 Mar. 2004
• Registration Loop (Adjust)
• Paper Passage (Test)
• Tray Width Adjust (Adjust)
3-2
4582fs3527e0