Konica Minolta Bizhub C350 Service Manual page 566

Other
[20]
[23]
[25]
[26]
bizhub C350 Field Service Ver.1.0 Mar. 2004
10. Remove the Timing Belt [18].
11. Remove the E-Ring [19], and remove
[19]
[18]
4583fs2507c0
12. Turn the Gear [21] to position the
[21]
[22]
4583fs2508c0
13. Insert a pin of approx.φ2 [23] (alter-
4583fs2509c0
14. Turn the Gear [24] to position the
[24]
4583fs2510c0
15. Insert a pin of approx.φ2 [26] (alter-
4583fs2511c0
2-8
the Staple Position Confirm Gear
[20].
hole [22] in the Gear of the Staple
Driver to the hole behind.
natively, 2 mm hexagonal wrench or
the like can be preferably used) into
the hole, and fix the Gear.
hole [25] in the Cam of the Staple
Clincher to the hole behind.
natively, 2 mm hexagonal wrench or
the like can be preferably used) into
the hole, and fix the Cam.