I/O Check; Check Procedure; I/O Check List; I/O Check Screen - Konica Minolta Bizhub C350 Service Manual

I/O check

2. I/O check
2.1

Check procedure

• To allow sensors to be checked for operation easily and safely, data applied to the IC on
the board can be checked on the panel with the main unit in the standby state (including
a misfeed, malfunction, and closure failure condition).
<Procedure>
1. Set the mode to the Tech. Rep. Mode.
2. Touch the "State Confirm" Check key.
3. Touch the "I/O Check" key.
2.2

I/O check list

2.2.1

I/O check screen

• This is only typical screen which may be different from what are shown on each individ-
ual main unit.
2.2.2 I/O check list
A. Sensor monitor 2
Symbol Panel display
PI2-DU Set
PI1-DU Paperpassage 1
PC1-DU Paperpassage 2
bizhub C350 Field Service Ver.1.0 Mar. 2004
Part/Signal name
Duplex Unit Door Set Sensor
Duplex Unit Transport Sensor 1
Duplex Unit Transport Sensor 2
3-2
4036fs3027e0
Operation characteris-
tics/Panel display
1 0
OPEN CLOSE
Paper Paper not
present present
Paper Paper not
present present