Konica Minolta Bizhub C350 Service Manual page 155

bizhub C350 Field Service Ver. 2.0 April 2004
(5) PSL Administrator Code Change
Functions • To change the PSL Administrator Code
• This function becomes available depending on the option installation.
Use • To change the PSL Administrator Code required for entering the Admin. Mode
Setting/Procedure • Use the 10-Key Pad to enter the new Administrator Code. 4 digits (0 to 9)
D. 4/4
(1) Panel Reset Timer
Functions • To set the time it takes the Auto Panel Reset function to be activated after a copy
cycle has been completed or the last key operated.
• The default settings are established when Auto Panel Reset is activated.
Use • To select not to enable Auto Panel Reset or change the time it takes the Auto
Panel Reset function to be activated
Setting/Procedure • Use the 10-Key Pad to enter the Auto Panel Reset time. (1 to 9 min.)
• The default setting is 1 min.
(2) Add Prefix/Suffix
Functions • This function is used to specify whether or not a prefix/suffix is added when
recalling or entering an address in Scan mode or Box mode.
Use • To add Prefix/Suffix to the address in the Scan or Box mode
Setting/Procedure • The default setting is No.
(3) Prefix/Suffix Registration
Functions • To register or change Prefix or Suffix
• Up to eight different types of Prefix or Suffix can be registered.
Prefix: Characters added to the header portion of the document (header)
Suffix: Characters added to the footer portion of the document (footer)
Use • To register or change the text displayed as Prefix or Suffix
Setting/Procedure • Up to 20 characters can be used for Prefix.
• Up to 64 characters can be used for Suffix.
1 min (1 to 9)
Yes No
3-19
No
Utility Mode