Field Service Ver. 1.0 Apr. 2005
6.
Mechanical adjustment
6.1
Height Adjustment
OK
NG
Confidential – for internal use only, do not distribute
1. Check the gap between the Original
NOTE
• Be sure to open, then close the
1382U024AA
2. If there is a gap, perform the adjust-
1382U025AB
3. Turn the adjusting screw in the hinge
Adjusting
screw
Screw rotation direction
Clockwise: Raises the Automatic Docu-
ment Feeder.
Counterclockwise: Lowers the Auto-
1382U026AA
matic Document Feeder.
6. Mechanical adjustment
Glass and the spacer on the Auto-
matic Document Feeder.
Automatic Document Feeder, and
then check during pre-lighting of
the scanner.
ment described in step 3.
of the Automatic Document Feeder
until the spacer contacts the Original
Glass.
17