How To Reset - Konica Minolta Bizhub C350 Service Manual

Includes: standard controller df-601 pc-101/pc-201 pc-401 ad-501 fs-501

Hide thumbs Also See for Bizhub C350:

Table of Contents

Trouble code

Elevate Mechanism malfunctions • The Exit Tray Home Position Sensor (PI9-FN) is not

Backup RAM malfunction

• The Punch Unit detects punch-related malfunctions and notifies the Finisher of

any malfunction detected.

How to reset

• Press the Trouble Reset Switch on the Tech. Rep. Setting Switches Board to reset the

following malfunctions: scanner-related malfunctions, fusing-related malfunctions, expo-

sure lamp-related malfunctions and C3FFF.

• For any other malfunctions, open and close the Front Door or turn OFF and ON the

Power Switch.

• Before starting the troubleshooting in relation to the Punch Mechanism C0B7X, be

sure to turn OFF the Power Switch of the main unit.

bizhub C350 Field Service Ver.1.0 Mar. 2004

blocked even after the lapse of a given period of time

after the tray has started moving up.

• An encoder clock input is not detected within a given

period of time during operation of the tray.

• Data written in the Backup Memory differs from what is

recorded in it and writing operation is not correctly per-

formed even with two retry sequences (a total of three

writing sequences).

Show Quick Links

Table of Contents