Copy Program Recall; Printer Setting; Default Setting - Konica Minolta Bizhub C350 Service Manual

bizhub C350 Field Service Ver. 2.0 April 2004
3.8

Copy program Recall

Functions • To call up a program registered through Job Memory Input.
Use • To call up a job program that the user has previously programmed and regis-
tered
Setting/Procedure • Select the program number.
• If the machine is not equipped with capabilities (e.g., stapling) that were pro-
vided when the program was registered, calling up that particular program is dis-
abled.
3.9

Printer Setting

3.9.1

Default setting

A. Basic
(1) Default Tray
Functions • To set the default Tray used by the printer
Use • To change the default value of Tray for the printer
Setting/Procedure • The default setting is Auto Paper Select.
✽ Displayed options are only the paper sources connected to the machine.
(2) Paper Size
Functions • To set the default paper size used by the printer
Use • To change the default value of paper size for the printer
Setting/Procedure ✽ Default setting depend on the marketing area setting.
Metric Area : A4
(3) Output
Functions • To set the default values of printing method and number of copy sets for the
printer
Use • To change the default values of printing method and number of copy sets for the
printer
Setting/Procedure Printing Method
• The default setting is Simplex.
Binding Method
• Displayed when Duplex is selected
• The default setting is left-edge binding.
No. of Sets
• The default setting is 1.
Inch Area : Letter
Simplex Duplex
(left-edge binding) (top-edge binding)
1 (1 to 999)
3-13
Utility Mode