Mechanical adjustment
4.4.4
Manual adjust: FD 1-Sided / 2-Sided document stop position adjustment
Adjusted range: -7 mm to + 7 mm
A. Adjustment procedure
1. Set the mode to the Tech. Rep. Mode.
2. Touch "ADF Check".
3. Touch "Original Stop Position".
E
F
bizhub C350 Field Service Ver.1.0 Mar. 2004
4. Select "1-Sided Set" or "2-Sided
Set".
5. Enter the value from the ten-key pad.
(Press the "ID" key to change the +/-
[1]
code.)
4582fs3516c0
• To shift the position in the direction of
F, set the code to +.
• To shift the position in the direction of
E, set the code to -.
6. Touch "END".
4582fs3517c0
3-12
4582fs3538e0