Konica Minolta Bizhub C350 Service Manual page 207

bizhub C350 Field Service Ver. 2.0 April 2004
(2) Mail check
Functions • To set whether or not to use Mail Check and the time interval for the POP3
server used for the Remote Diagnosis System for the standard controller
Use • To select not to use Mail Check
• To change the time interval for Mail Check
Setting/Procedure • The default setting is 15 min.
(3) Connection timeout
Functions • To set the timeout period for connection during reception
Use • To change the timeout period for connection during reception
Setting/Procedure • The default setting is 60 sec.
C. Send
• These are the settings for the Send used in the Remote Diagnosis System for the stan-
dard controller.
(1) SMTP server
Functions • To set the SMTP server address for transmission used for the Remote Diagnosis
System for the standard controller
Use • To set the address of the SMTP Server
Setting/Procedure • IP Address Version 4 format
[0 to 255]. [0 to 255]. [0 to 255]. [0 to 255]
(2) SMTP port number
Functions • To set the SMTP port number for transmission used for the Remote Diagnosis
System for the standard controller
Use • To set the Port Number of the SMTP Server
Setting/Procedure • The default setting is 25.
(3) Timeout of SMTP Server
Functions • To set the timeout period for transmission
Use • To change the timeout period for connection during transmission
Setting/Procedure • The default setting is 60 sec.
15 min. (1 to 120 min., No)
60 sec. (30 to 300 sec.)
25 (1 to 65535)
60 sec. (30 to 300 sec.)
3-71
TECH. REP. MODE