Replacing The Waste Toner Bottle - Konica Minolta Bizhub C350 Service Manual

Periodical check
1.5.16

Replacing the Waste Toner Bottle

NOTES
• If a Finishing Option is installed, remove if from the Main Unit before trying to
replace the Waste Toner Bottle.
• When removing the Finishing Option, support the Horizontal Transport Unit with
your hand to prevent if from dropping.
[2]
bizhub C350 Field Service Ver. 2.0 April 2004
1. Turn OFF the main switch.
2. Open the Left Door.
[1]
3. Grasp the handle, and remove the
waste toner bottle [1].
NOTES
• Raise the waste toner bottle gently
before removing it.
• If scattered toner has accumulated
4036fs2045c1
in the vicinity of the toner collecting
port, do not tilt the waste toner bot-
tle when removing it.
• Do not leave the waste toner bottle
in a tilted condition after removing
it.
4. Remove the Cover [2] of Waste
Toner Bottle, and set it on the Col-
lecting port.
4036fs2615c1
5. Clean the surface around the waste
toner collecting port.
6. Remove the waste toner bottle from
its box, and remove the packing
material.
7. Grasp the handle, and set the waste
toner bottle in place.
8. Close the Left Door.
4036fs2509c0
2-20